Application For Supplemental Type Certificate (Stc) - Letter Of Intent

Application For Supplemental Type Certificate (Stc) - Letter Of Intent

Engineering

This service allows the beneficiaries to request GACA support for certification of major change in type design to be performed on Saudi registered aircraft. GACA decision to support the applicant is the pre-requisite for Supplemental Type Certificate (STC) Project initiation.

1. GACA Type Certificate Acceptance (TCA)
2. Classification Assessment
3. Familiarity with the STC Certification process.

GACA AC 021-07 Alterations and Repairs.

  1. Approval privileges document (FAA ACO Agreement, FAA ODA, EASA Design Organization Approval, or equivalent) (if applicable).).
  2. Company Manual (Handbook, Procedures, Work Instructions) related to the intended certification activities.
  3. Design change classification document issued in accordance with GACAR §21.66 (equivalent to FAR §21.93 (a)&(b) or EASA 21A.91).
  4. Letter of application addressed to General Manager of Airworthiness. See additional help.
  5. Owner/operator acknowledgement for the proposed design change.

1. Refer to GACA AC 021-07 Alterations and Repairs. 2. Confirmed payment of all applicable fees is a requirement for an application to be accepted for processing by the GACA

The letter of intent should be of sufficient detail to allow the GACA to make the decision to support the project. The content must indicate the following:
1. The nominated persons (i.e. already appointed GACA-DERs, GACA-DARs, FAA DERs or other foreign delegated individuals/organizations) would have sufficient scope of delegation to address the required compliance aspects of the project. 
2. Explanation of the purpose of the design change is likely to be advantageous. Identify the locations of removed and of installed equipment and components.
3. Determine if there is any novel and unusual design features will be introduced by the proposed design change.
4. Use of existing approvals as a basis for the GACA STC (e.g., FAA STC), if applicable.
5. Concurrent Modifications.
6. Location of certification activities.
7. Name(s) of Owner, Operator, Installer, GACA AMO.
8. Eligible Serial Number and Registration Mark(s)
9. Estimated project schedule including major milestones
 

  1. التقديم:يجب على مقدم الطلب تقديم جميع المستندات ذات الصلة حسب طلب الهيئة العامة للطيران المدني
  2. المراجعة:ستقوم الهيئة بمراجعة المستندات المقدمة والتحقق من امتثالها للوائح والقوانين وطلب تعديلات من المقدم إن لزم.
  3. إصدار :لن تقوم الهيئة بإصدار شهادة أو رخصة إلا عندما تكون مقتنعة تمامًا بأن جميع الإجراءات التنظيمية قد تمت معالجتها بشكل مناسب.
  4. إستلام:الشهادة أو الرخصة إلكترونيا أو يدويا حسب ألية عمل الخدمة الإلكترونية المطلوبة.

المستفدين

GACA certificated air carrier, air operator or repair station certificated under GACA/FAR Parts 121, 125, 135 or 145, or a GACA/FAR Part 91 Aircraft Owner/Operator who has engineering resources or can obtain engineering services under contract.

موعد التسليم

10 Business Days.

الأسئلة المتداولة

دليل الهيئة

الهاتف

1929

الإيميل

engineering@gaca.gov.sa

التعليقات والملاحظات

لاي استفسار او ملاحظات حول الخدمات الحكومية يرجى ملء المعلومات المطلوبة

تواصل معنا